What is Music Robot Kit?
The music robot kit uses an ultrasonic module to detect the position of gestures, then the stepper motor will be driven to move Xylophone’s hammer. When the hammer moves to the right bar, robot will control electromagnet to hit the bar. Users can also control the music robot through upper computer, or play your own music with the robot.
|This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on your computer. By this application you can use the keyboard of your computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in the application and then send it to the robot, the robot will play the music you have sent automatically.|
• Three different ways to play this Music Robot
1. Control by the position of gestures (Using an ultrasonic modules detect the position)
2. A pre-programmed tune can be played (or you programme to play)
3. Control by PC Software
• High quality stepper motor mates with high performance Me stepper motor driver
• Easy to drive and can play Xylophone very well
If you have any question about this product or you need technical support, please post it in Makeblock forum.
1. Please download the user guide package from http://learn.makeblock.com/music2/.
The package includes documents and software which are required before using your 3D printer.
2. We have had the firmware in the mainboard yet, you can also find it from Arduino Tool according to your needs.
|1 x Beam 0824-48||1 x Open-end Timing Belt (1.3m)||4 x Plastic Rivet R4120|
|2 x Beam 0824-96||2 x Threaded Shaft 4x39mm||4 x Plastic Ring 4 x 7 x 2mm|
|1 x Beam 0808-88||2 x Shaft Collar 4mm||1 x Xylophone|
|1 x Beam 0808-184||4 x V-slot Bearing||1 x Streamer|
|2 x Slider 496||2 x Flange Bearing 4x8x3mm||1 x Me-Orion|
|1 x Bracket 3 x 6||1 x HEX Screwdriver 2.5mm||1 x Me-Ultrasonic Sensor|
|1 x Plate 3 x 6||1 x Cross Screwdriver 3mm||1 x Me Stepper motordriver V1.0|
|1 x Plate 7 x 9||2 x HEX Allen Key 1.5mm||1 x LED RGB Strip|
|1 x Plate I1||1 x Wrench||1 x Micro Switch|
|1 x Belt Connector||10 x Socket Cap Screw M4x8||1 x RJ25 Adapter|
|1 x 42BYG Stepper Motor Bracket||26 x Socket Cap Screw M4x14||1 x Wall Adapter Power Supply – 12VDC|
|1 x DC Frame Type Solenoid HCNE1-0530||27 x Nut M4||3 x 6P6C RJ25 cable-20cm|
|1 x 42BYG Stepper Motor||6 x Countersunk Screw M3x8||1 x USB 2.0 A-Male to Micro B-Male Cable|
|1 x Shaft Connector-4mm||3 x Headless Set Screw M3x5||1 x Base Bracket V1.1|
|2 x Timing Pulley 62T||6 x Plastic Rivet R4060||6 x Nylon Cable Ties|
|1 x Timing Pulley Slice 62T||4 x Plastic Rivet R4100||5 x Gasket|